Home > Diamond Blades > Bridge Saw Blades > Quartzite Bridge Saw Blades >

16" Quartzite Donatoni Blade

16" Quartzite Donatoni Blade


 
Alternative Views:


List Price: $360.92


Product Code: 128904D
Qty:

DESCRIPTION
 
16" x 20mm x 60mm Donatoni White Lion Diamond Bridge Saw blade for Quartzite, Granite, Engineered Stone

16" Quartzite Diamond Bridge Saw blade made specifically for the Donatoni Bridge Saws.

Donatoni Bridge Saws require a blade with a pin hole in the core. Weha White Lion Donatoni Bridge Saw Blades come with the pin hole in the core for exact mounting for the Donatoni saws.

Details about the the Weha White Lion Quartzite Diamond Bridge Saw blade

The Weha White Lion Quartzite Diamond Bridge Saw blade is the best diamond blade to cut Quartzite Stone. Outstanding on Granite and Engineered Stone as well.

Arrix (array) diamond layered technology for constant high speed cutting.
Outstanding life for 20mm diamond bridge saw blades.

With a patented diamond segment design to increase cutting speed by 35%.

Diamond segment design will not chip the stone.

16" x 20mm height segment
60mm arbor

Suggested Operating Parameters on the Donatoni saw when cutting Quartzite Stone:
Bridge Saws: 1350 rpm.32"-60" per minute-depending on hardness of the Quartzite.

Suggested Operating Parameters on Quartz and Granite:
Bridge Saws: 1350 rpm.60"-120" per minute-depending on hardness of the Quartzite.


Why is the Weha Quartzite Diamond Bridge Saw Blade the best Blade to cut Quartzite on the Donatoni Saws?

Because of the type of bond that the White Lion Quartzite Bridge Saw Blade is produced with, the life will be a little shorter than other 20mm granite bridge saw blades. But being able to cut 3cm quartzite stone in one pass without having sparks shoot out of the stone is a huge benefit and worth the sacrifice of theshorter life.

We have have taken into consideration all 5 questions above to design and create an ARIX Bond segment that will cut fast and smooth, without chipping, and give the life of a 25mm height segment.

The Segment is the Layered ARIX technology to give high diamond concentration and continuous diamond contact with the stone. The bond matrix is specifically for quartzite, quartz, granite, and engineered stone.

What core did we use? German silent core, of course!

What we produced is a premium designed blade that will give a fab shop production, speed, clean cuts, life, and overall exceptional performance.

1) What bond will be used for the material you will be cutting. The White Lion Bridge Saw blade bond was made specifically for cutting Quartzite stone. Granite and Engineered Stone will be cut at even a faster speed than other 20mm granite bridge saw blades.

2) What type of Matrix will be used? We used the ARIX Layered diamond Technology for continuous diamond contact to the stone and maximum diamond concentration for as long of a life as possible when cutting Quartzite, granite and engineered stone

3) Do you want life or speed? Well, we wanted both! By using the ARIX matrix diamond technology with the segment design to remove slurry and "bite" the stone, we have achieved a fast cut of 10-15 ft per minute with exceptional life in Granite and Engineered stone. Depending on the Quartzite, Cutting speed with the White Lion Bridge Saw blade will be in the 5-10 ft per minute range for cutting Quartzite. It is always best to watch the amps on the saw to see the best cutting speed when cutting quartzite.

4) How tall of a segment will be used for the material being cut? We chose a 20mm segment height based upon the bond of the segment. We have found that a 20mm height when cutting Quartzite material either on straight or miter cuts seem to be the optimal segment height. This allows the maximum cutting live of the quartzite blade without the inherent risks of breaking 25mm segments, jamming 25mm segments into tables, etc.

5) What type of core will be used for the job at hand? We have chosen to stay with the most widely used and respected core in the world, the German made Silent Core. This core will run quite, smooth, and will not fatigue or deflect during cuts. Below you will see a review from one of the White Lion Quartzite Bridge Saw Blade users who are using this silent core blade to cut 45 degree miters on 2" thick quartzite without any issues. This Silent Core is strong! It will be a little louder than other silent cores but not a bad price to pay in order to cut quartzite on a mite without deflection.

    CONTACT YOUR LOCAL DISTRIBUTOR TO PURCHASE.

    Many of our distributors do not have websites. Please request this product from your local delivery distributor. They can provide you pricing and detailed information.

    LET WEHA HELP YOU FIND A DISTRIBUTOR NEAR YOU:

    1. Please email us at [email protected] or call us at 1-877-315-4761 and provide your address. We can provide the nearest distributor to you.
    2. You are welcome to add items to the cart and check out. Select "Have nearest distributor contact me".

    As soon as we receive the order, we well immediately forward to the nearest distributor. They can contact you to fill the order ASAP.



    Rate this product. Be the first to write a review »