Home > Adhesives > Cartridge Glue > Glaxs Ceramic Adhesives >

Ebano

Ebano


 
List Price: $40.97



Product Code: 1RGLAXSCEBANO
Qty:

DESCRIPTION
 

Ebano Color Glaxs 215 ML

Ebano Color Glaxs 215 ML is made of two previously dosed components. This multipurpose Ebano Color Glaxs 215 ML is produced in a special cartridge ratio 2+1, with 2 tubes and a mixer which allows the correct extrusion of the product very easily. Once inserted in a proper gun with 2 pistons, the product is ready for use.

Ebano Color Glaxs 215 ML is suitable to glue and to mend:

  • Onyx
  • Marble
  • Solid Surface
  • Quartz
  • Ceramic
  • Granite
  • Porcelain
  • Limestone
  • Travertine
  • Stone

This adhesive can also be used to bond different materials together such as:

  • Marble-Marble
  • Marble-Granite
  • Stone-Ceramic

Compatible With Many Products

Glaxs is a versatile adhesive and it is not only color matched to various colors of materials, but it also is compatible with many kinds of surfaces, including these 25 popular producers:

  • Sea Quartz
  • Safas Corp
  • Franke
  • Northstar - Acrylic
  • Silestone
  • Venetian From MSI
  • Kerlite
  • Karadon
  • Diamante Quartz
  • Precision Surfaces
  • Florim
  • QStone
  • Fiandre
  • Ameristone
  • Alkemi
  • Bloom Stone
  • Radianz
  • Stone Italiana
  • Kerrock
  • Xtone
  • Spectrum Quartz
  • Metroquartz
  • Roxx
  • Nile Quartz Surface
  • Techlam

Suitable for indoor and outdoor use.

Instructions for Use:

  1. All the surfaces to be treated must be cleaned and free of dust and grease.
  2. In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
  3. Remove the threaded extremity and uncap the cartridge.
  4. Fix the mixer to the cartridge through the threaded nozzle.
  5. Before applying the glue on the surfaces, do spurge around 5 cm in line.
  6. Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
  7. After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.

Shelf Life:

The products in cartridge will last at least 18 months in the pack and 12 months out of pack, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.

Working Specs

  • Gel time in bulk at 77°: 3-5 min
  • Tacky free time at 77°: approx. 15 min
  • Working time at 77°: 45-60 min
  • Temp range for use after hardening: -13°F to 140°F

Technical Information

Technical Data for Glaxs Ebano
Viscosity cps 25°C 20 r.p.m (ASTM D2196) tixotropic liquid
Density at 25°C gr/cm3 1.27
Aspect colored liquid
Ratio of use glue/hardener 2+1
Gel time (in bulk) at 25°C in min 3-5 min
Time for handling pieces 15-20 min
Working time suggested at 25°C in min 45-60 min
Minimum reaction temperature +1°C
Minimun temperature of use after hardening -25°C
Minimun temperature of use after hardening +60°C
Shelf life at 18-20°C 24 months
Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 1 hour (ASTM D 4541)*9.0 - 10.0
Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 24 hours (ASTM D 4541)* 9.5 - 10.5
Adhesion force in MPa at 25°C on quartz, diamond cut surface after 1 hour (ASTM D 4541)*9.0 - 10.0
Adhesion force in MPa at 25°C on quartz, diamond cut surface after 24 hours (ASTM D 4541)*12.0 - 13.0
Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 1 hour (ASTM D 4541)*9.0 - 11.0
Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 24 hours (ASTM D 4541)*10.0 - 13.0
Ebano Technical Data Sheet

Rate this product. Be the first to write a review »