Home > Adhesives > Cartridge Glue > Glaxs Ceramic Adhesives >

Tabacco - P 842

Tabacco - P 842


 
List Price: $40.97



Product Code: 1RGLAXSCTOBACCO
Qty:

DESCRIPTION
 

Tabacco - P 842 215 ML 2:1 Cartridge Glue

Glaxs Tabacco - P 842 is a high adhesion system for indoor and outdoor bonding of Limestone, Natural Granite, Quartz, Onyx Countertops, Porcelain Panels, and similar surfaces. Glaxs is available in a wide variety of colors. Requires use of special M200XMR Cartridge Gun.

Product Compatibility

Tabacco - P 842 is one color of many Glaxs colors. Each color of Glaxs is a versatile adhesive and it is not only color matched to various colors of materials, but it also is compatible with many kinds of surfaces, including these 25 popular producers:

  • Ameristone
  • Pinnacle
  • Hanex North America
  • Vetrazzo
  • Quartex Surfaces
  • Belenco
  • Vadara
  • Meganite Surfaces
  • MSI
  • Formica Stone
  • Geos
  • Livingstone
  • Dakota Quartz
  • Lexmar
  • Simplicity
  • Montelli
  • Wilsonart Quartz
  • Terrastone
  • Metroquartz
  • Vicostone
  • Solaris
  • GEOLUXE
  • Laminam
  • Aurea Stone
  • Atlas Plan

Glaxs Advantages:

  • VOC free
  • Excellent adhesion
  • Ultra rapid
  • Excellent color stability to sunlight
  • Glossy, shiny and easy to polish
  • Indoor and Outdoor use
  • Pre-dosed for easy dispensing
  • Comes with 2 mixing nozzles

Glaxs Tabacco - P 842 Instructions for Use:

  1. All the surfaces to be treated must be cleaned and free of dust and grease.
  2. In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
  3. Remove the threaded extremity and uncap the cartridge.
  4. Fix the mixer to the cartridge through the threaded nozzle.
  5. Before applying the glue on the surfaces, do spurge around 5 gr in line.
  6. Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
  7. After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.

Shelf Life:

Glaxs Tabacco - P 842 in cartridge will last at least 12 months, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.

Safety Rules:

Resin and hardener are chemical products, please read the safety data sheet before usage and the rules written on the product label.

Working Specs

  • Gel time in bulk at 77°: 3-5 min
  • Tacky free time at 77°: approx. 15 min
  • Working time at 77°: 45-60 min
  • Temp range for use after hardening: -13°F to 140°F

Technical Information

Technical Data for Glaxs Tabacco - P 842
Viscosity cps 25°C 20 r.p.m (ASTM D2196) tixotropic liquid
Density at 25°C gr/cm3 1.27
Aspect colored liquid
Ratio of use glue/hardener 2+1
Gel time (in bulk) at 25°C in min 3-5 min
Time for handling pieces 15-20 min
Working time suggested at 25°C in min 45-60 min
Minimum reaction temperature +1°C
Minimun temperature of use after hardening -25°C
Minimun temperature of use after hardening +60°C
Shelf life at 18-20°C 24 months
Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 1 hour (ASTM D 4541)*9.0 - 10.0
Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 24 hours (ASTM D 4541)* 9.5 - 10.5
Adhesion force in MPa at 25°C on quartz, diamond cut surface after 1 hour (ASTM D 4541)*9.0 - 10.0
Adhesion force in MPa at 25°C on quartz, diamond cut surface after 24 hours (ASTM D 4541)*12.0 - 13.0
Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 1 hour (ASTM D 4541)*9.0 - 11.0
Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 24 hours (ASTM D 4541)*10.0 - 13.0
Tabacco - P 842 Technical Data Sheet

Rate this product. Be the first to write a review »