Home > Adhesives > Titanium Vinyl Ester Glue >

Tenax Titanium Flowing 1 Liter

Tenax Titanium Flowing 1 Liter


 
Alternative Views:


List Price: $23.45


Product Code: 1AAA00BM01
Qty:

DESCRIPTION
 

Tenax Titanium Flowing Glue 1 Liter

Tenax Titanium has been developed with the latest Vinyl Ester technology and is ideal for seaming, laminations, miter cuts, chip repair on several materials including:

  • Granite
  • Marble
  • Quartz
  • Quartzite

Titanium is very light in color and does not darken after cure. Therefore, it is a superb choice for use on white and light colored materials. However, it also takes color very well for darker stone.

Workability

Titanium vinyl ester is very fast and has very good workability. It is easy to stir and spread and has excellent adhesion in a short amount of time. This means the stone to be handled in a very short time even at low temperatures.

Curing

After curing, Titanium has a flat surface with a high gloss and is very polishable. After the addition of the hardener the glue will change color but will return to the original white color after a few minutes. This can be used as a catalyst indicator. To retain the white color after curing do not use more than the recommended amount of hardener.

Performance

Titanium contains a UV absorber. It offers exceptional strength for CNC and line machine use right after cure. It is also excellent for indoor applications and outdoor applications that stay above 32°F.

At A Glance

  • Excellent Adhesion in Short Amount of Time
  • Superb on White and Light Material
  • Very Polishable
  • Colors Easily

Instructions for use:

Please follow the instructions below for using Titanium. This adhesive is a product that works based on chemical reactions. Therefore, following the directions below is key to the success of your using the product.

  1. Make sure the surface to be treated is dry, clean and free of dust.
  2. If coloring, add the coloring paste to the resin before mixing it with the catalyst. An excess of coloring paste may affect the final product so use caution.
  3. Mixing ratio resin to catalyst is 100:1 (see chart below).
  4. Stir vigorously and apply.
  5. Do not place unused product back in the can.
  6. Make sure can is sealed tightly after use.

25°C = 77°F

Shelf Life:

Keep away from heat, humidity and sun. Product will last at least 10 months if kept between 68°F - 77°F.

Safety:

Please read the safety data sheet before using.


Rate this product. Be the first to write a review »