Home > Adhesives > Polyester Adhesives > Travertine Filler >

Travertine Filler 4 LT

Travertine Filler 4 LT


 
Alternative Views:


List Price: $59.98

Product Code: 14AC01BJ10
Qty:

DESCRIPTION
 
Tenax Travertine Filler Semisolid 4 Liter
Tenax Travertine filler is used to horizontally repair, rebuild, glue, and fill travertine, as well as similar stones. Tenax Travertine filler is a semisolid consistency that is smooth and easy to spread. It is used to fill all size holes in travertine and will accept a polish. Not suitable for temperatures below 32°. Recommended for interior use. Other colors available upon special request.

Instructions for use:
Make sure surface to be treated is dry, clean and free of dust. If adding coloring paste do so before mixing with catalyst. An excess of coloring paste may affect the final product so use caution. Mix the catalyst with glue at 2-3% in weight (see chart below). Stir vigorously and apply. Apply a slight excess to account for shrinkage. Let the filler dry until the excess can cut off with a razor blade. Remove leftover traces with acetone. Do not place unused product back in can. Make sure can is sealed tightly after use.

25°C = 77°
Technical Data
Viscosity cps 25°C r.p.m.(ASTM D2196) 200000-300000 cps
Density at 25°C gr/cm3 1.65
Aspect Colored Paste
Ratio of use glue/hardener 100+2/3
Gel time (in bulk) at 25° C in min (1) 1.30-2.30
Tacky free in thin layer at 25°C in min 5-10
Working time suggested at 25°C in min 15-20
Minimum reaction temperature 0°C
Minimum temperature of use after hardening 0°C
Maximum temperature of use after hardening +110°C
Shelf life at 25°C for the WA version 6 Months
Shelf life at 25°C for the standard version 3 Months
Tensile Test ASTM D638
Ultimate tensile stress MPa 50
Extensibility >2%
Tensile modulus 4000
Flexion Test ASTM D790
Breaking load Mpa 110
Adhesion Test ASTM D4541
Adhesion force at 25°C marble boticcino polished after 2 hours 3.0
Adhesion force at 25°C marble boticcino polished after 24 hours 4.0


Shelf Life:
Keep away from heat, humidity and sun. Product will last at least 6 months if kept between 65° - 77°.

Safety:
Please read the safety data sheet before using.

Rate this product. Be the first to write a review »