Home > Diamond Blades > Blades by Size > 14 Inch Blades

14" Diamond Blades

Choosing 14" Diamond Blades

If your shop runs saws that take 14 inch diamond blades, you know that not all blades will work for every use. You also know that selecting the proper blade for the job is paramount. We have gathered all of the 14" diamond blades here. You can check out 14 inch blades, or read about the 14" diamond blade uses toward the bottom of this page.

Sort By:
1 2
14" Copper Core Diamond Blade, Copper Core Glass Blade, Copper Core Porcelain, Part # 51555 14" Copper Core Reinforced Blade

14" copper heat dissapating core diamond blade with a continuous rim and reinforced to cut various materials like porcealin.

List Price: $143.96
Part#  7615 Weha Low Horsepower 14" Diamond Rail Saw Blade Low HP Weha 14" Low Horsepower Blade

14" Low HP bridge saw blades are designed for rail saws that cut grnaite and other natural stone or engineered stone materials.

List Price: $193.80
14" Economy Bridge Saw Blade 14" Economy Bridge Saw Blade

14" bridge saw blade that is a steady running diamond blade for granite, quartz, marble, and even quartzite materials.

List Price: $215.00
Part#  VZ051413 14" Weha Matrix S Diagonal Diamond Bridge Saw Blade 14" Matrix S Bridge Saw Blade

The 14" Matrix S blades are premium diagonal layered diamond blades designed to cut stone surface materials fast, clean and quiet.

List Price: $245.16
14" Dekton Blade 350/60 14" Dekton Blade 350/60

Dekton 14" bridge saw blade for cutting sintered materials including Neolith, Dekton, and other sintered stone materials.

List Price: $247.08
14" Dekton Bridge Saw Blade 14" Dekton Bridge Saw Blade

Dekton 14" bridge saw blade for cutting sintered materials including Dekton ultra-compact sintered stone materials.

List Price: $259.05
14" Ceramic & Porcelain Blade 14" Ceramic & Porcelain Blade

14" ceramic and porcelain bridge saw blade for cutting sintered materials including ceramics, porcelains, and other sintered materials.

List Price: $259.05
Part#  5350021 Weha 14" Diamond Bridge Saw Blade Marble 14" Calcareous Stone Blade

14" diamond blade made for the specific use of cutting calcareous stone surfaces like marble, travertine, limestone, and onyx.

List Price: $261.12
14" Hard Stone Diamond Bridge Saw Blade 14" Hard Stone Grey Leopard Blade

14" silent core diamond bridge saw blade is made to remove slurry fast, keep tons of water between the segments and stone.

List Price: $267.00
14" White Lion Quartzite Blade 14" White Lion Quartzite Blade

14" quartzite blade that is an effective blade for hard stone including quartzite and cuts 3cm quartzite slabs in one pass.

List Price: $288.74
14" x 25mm Black Cougar 14" x 25mm Black Cougar

14" Cougar diamond blade is a 25mm segment height blade for cutting a wide range of natural and engineered stone materials in the shop.

List Price: $340.26
14"  Quartzite Donatoni Blade 14" Quartzite Donatoni Blade

14" quartzite blade that is an effective diamond Donatoni bridge saw blade for hard stone and cuts 3cm quartzite slabs in one pass.

List Price: $342.09
   
 
1 2

About 14" Diamond Blades

14" Diamond Blade Usage

14 inch diamond blades are used for cutting everything from natural and engineered stone to ceramic and porcelain tiles. No matter what material you are cutting, there is a 14" diamond blade made for the task. However, it is important to use the right blade for the material you are cutting. Good tile blades produce a nice, clean cut on the tile and can make a difference in the project. Likewise, using a well made diamond blade on your shop saw also produces a clean, fast cut.

14" Copper Core Reinforced Blade

One of the big challenges to cutting a hard material like porcelain, glass, natural stone, or tile is the heat that can build up in the blade's core. The 14" copper diamond blade is made to draw the heat away from the rim and toward the center of the blade. Since copper conducts heat so well, it is very effective for this. The copper body allows the heat generated by the friction of the blade against the stone to move away from the outside edge.

14" Dekton Blade for Sintered Stone

Looking for a diamond blade that will give you the best cut on Dekton materials? he 14: Dekton diamond blade is engineered for the purpose cutting sitnered stone Dekton materials. Dekton, like all sintered materials is extremely hard and requires a diamond blade that can cut hard, brittle, materials. The Tenax Dekton blade does this very well.

14" Milling Wheel

Working with natural stone and other materials that are not always completely level brings the potential for challenges further along the workflow. Milling wheels allow the fabricator to create a level surface by aggressively removing stock from the surface of the material.

14 Inch Grey Leopard Blade for Hard Stone

The 14" Grey Leopard diamond blade is designed to cut hard stone materials like granite, quartz, and quartzite. These blades cut hard stone fast and produce clean cuts.

14" diameter diamond blades are just one size of blade that is necessary for a productive fab shop, make sure you have the right equipment and blades for every task.