CNC Stone & Ceramic Core Bits

Diamond CNC Coring Bits for Stone & Ceramics

CNC core bits are an important tool for getting clean cut holes in very hard materials. Some natural stone is particularly hard. The same is true for engineered stone materials. The RockPecker line of core bits is designed for drilling holes in natural stone and engineered quartz material. In Addition to natural stone, there are some very hard man made materials in the porcelain, ceramic, and sintered stone realm too. These materials in some cases are harder and more brittle than natural stone and require coring bits made for the task. The Weramic CNC bits are, as the name implies designed for cutting holes in ceramic materials as well as sintered stone slabs.

Natural and Engineered Stone CNC Core Bits

Natural and engineered stone forms in a range of hardness. Some of the harder types of stone include granite, quartzite, and engineered quartz. The RockPecker CNC core bit line from Weha was fashioned for drilling these materials. These bits work for the following natural stone:

• Granite
• Concrete
• Marble
• Quartz
• Limestone
• Quartzite
• Onyx
• Slate
• Engineered Stone
• Bluestone
• Sandstone
• Travertine

CNC Core Bits for Ceramic & Sintered Materials

Like the harder natural stone materials, ceramic materials are also hard. The Weramic line of CNC core bits was developed specifically for cutting holes in the extremely hard materials like ceramic and porcelain. In addition to ceramic materials, the Weramic CNC core bits are effective for drilling sintered stone materials such as the following:

• Ceramic
• Porcelain
• Dekton
• Lapitc
• DuraLosa
• Neolith
• Crossville/li>
• XTONE
• GEOLUXE
• Florim
• SapienStone
• Antolini